The two numbers on the head of a metric bolt, such as 8.8 or 10.9, are its property class. They tell you its strength in a standard code defined in ISO 898-1, and they matter more than the size when a joint is loaded.
How to read the two numbers
- The first number multiplied by 100 gives the minimum tensile strength in MPa (N/mm²). Class 8.8 is 800 MPa.
- The second number is the ratio of yield strength to tensile strength, as a tenth. In 8.8, 0.8 × 800 gives a yield strength of 640 MPa.
| Class | Min. tensile strength | Approx. yield strength | Typical use |
|---|---|---|---|
| 4.6 | 400 MPa | 240 MPa | Light-duty, non-critical joints |
| 8.8 | 800 MPa | 640 MPa | General engineering and structural joints |
| 10.9 | 1000 MPa | 900 MPa | Highly loaded machinery, automotive |
| 12.9 | 1200 MPa | 1080 MPa | Socket head cap screws in tooling and dies |
Match the nut to the bolt
Nuts carry their own class numbers (for example 8, 10 and 12). A class 8 nut is normally paired with an 8.8 bolt, a class 10 nut with a 10.9 bolt and a class 12 nut with a 12.9 bolt, so the thread does not strip before the bolt reaches its rated load.
Finish and environment
Property class describes strength, not corrosion resistance. Plain, zinc-plated, hot-dip galvanised and stainless fasteners all behave differently outdoors or in wet processes. Very high-strength classes such as 12.9 can also be sensitive to hydrogen embrittlement after some plating processes, so mention the finish when specifying them.
Not sure which class your drawing needs? Send us the standard, size and quantity and we will help you specify it.