The markings on a bearing are a compact code. Once you know how to read it, ordering a replacement is straightforward. Take 6205-2RS as an example.
Breaking down 6205-2RS
- 6: bearing type. 6 denotes a single-row deep groove ball bearing.
- 2: dimension series. 2 is a light series (62xx); 3 is medium (63xx), which is physically larger and carries more load.
- 05: bore code. For codes 04 and above, multiply by 5 to get the bore in mm, so 05 gives a 25 mm bore.
- 2RS: contact rubber seals on both sides. ZZ (or 2Z) indicates metal shields instead.
Common bore codes
| Code | Bore |
|---|---|
| 00 | 10 mm |
| 01 | 12 mm |
| 02 | 15 mm |
| 03 | 17 mm |
| 04 and above | Code × 5 mm (04 = 20, 05 = 25, 06 = 30 mm) |
Seals, shields and speed
Rubber-sealed bearings keep out contamination and retain grease but run slightly warmer and allow lower maximum speeds than shielded bearings. Open bearings suit applications that are lubricated from outside.
Always confirm shaft size, housing size and operating conditions before substituting a bearing.